Log in or Register for enhanced features | Forgotten Password?
White Papers | Suppliers | Events | Report Store | Companies | Dining Club | Videos

Oil & Gas
Drilling & Production
Return to: EBR Home | Oil & Gas | Drilling & Production | Suppliers

NETZSCH: Constant delivery rate regardless of the product viscosity: NEMO® progressing cavity pump in a remote oilfield

Published 08 August 2017 | By NETZSCH

A special low-temperature design enables uninterrupted operation without maintenance even with widely fluctuating outdoor temperatures.

The transfer of crude oil always presents new challenges: Pumps were required for an oilfield in the Tatarstan region of Russia that would reliably guarantee a constant delivery despite the very viscous crude oil with a high sand content and widely fluctuating outdoor temperatures. Crude oil with a high sand content is one of the most difficult conveying media: On the one hand, the consistency is not clearly predictable because of the constantly changing composition and, on the other hand, the sand particles contained in the oil are highly abrasive. The associated wear means that traditional pumps have to be repaired or even replaced frequently, which means money for new systems or losses as a result of downtime. This was not an option for the important main pumps on the system for a 24-hour operation and a pumping system that is set up outdoors, where temperature can sometimes drop to - 40 ºC. The progressing cavity pump experts at NETZSCH Pumpen & Systeme therefore recommended the use of a total of eight of its tried-and-tested NEMO® progressing cavity pumps that have were specially adapted for these adverse conditions and guarantee absolute reliability for at least 10,000 hours, which means over one year in continuous operation. A drop in the delivery rate can be offset by an increase in speed on the pump unit. This allows the timely planning of services and the avoidance of downtimes.

netzsch

In the specific case in Tatarstan four NEMO® Type NM125SY progressing cavity pumps were chosen, each with a differential pressure of 18 bar, a pumping capacity of 120 - 220 m3/h and drive power of 250 kW as well as four Type NM148SY pumps, each with a differential pressure of 30 bar, a pumping capacity of 70-155 m3/h and drive power of 250 kW too. These are installed in an oilfield where the conveyed crude oil contains up to three percent sand. The pumping system was designed in such a way that the mixture of oil and sand is transferred to a central treatment station. This permits an effective reduction in the operating costs. Two 70 km long pipelines are fed from the eight pumps in total. As the sand content is so high, the mixture must be pumped to a separator system for further processing where the solids and some of the water in it are separated. The NEMO® pump displays one of its main advantages here: it considerably facilitates the separation process with the smooth, low-pulsation conveyance of product because it does not mix the phases in the conveying process and therefore significantly assists the separation.

A further challenge that the pumps in Tartastan have to meet is the viscosity of the crude oil as well as its fluctuating pressure between summer and winter due to the high outdoor temperature differences, which is why the NEMO® pumps used require an ad-ditional control range.

netzsch

High efficiency and freedom from maintenance

Initially the plan was to install NOTOS® multi screw pumps from NETZSCH to replace the existing pumps from a different manufacturer. However, after detailed examination of the application, the customer was advised to use NEMO® progressing cavity pumps. Problems can be expected with multi screw pumps even with special coatings due to the high sand content. NETZSCH Pumpen & Systeme GmbH therefore recommended the NEMO® progressing cavity pumps - these are distinguished by their easily control-lable, low shear pumping system with solid matter compatibility at the same time. The local requirements as well as the service structures of the component suppliers were taken into account during the consultation. A special low-temperature version of the progressing cavity pumps is used for the project in Tartastan including a drive with a gear box, couplings and bearings. The customer has confidence in the expertise and good experience that NETZSCH has gained in the operation of previously installed NEMO® pumps of a similar size. These pumps run in uninterrupted operation without maintenance and to the complete satisfaction of the customer.